Inheritance diagram for PhysicsSliderJoint:

Private Member Functions
proto external float	GetAngularPos ()
	Returns value of the angular position.
proto external float	GetAngularPos ()
	Returns value of the angular position.
proto external float	GetLinearPos ()
	Returns value of the linear position.
proto external float	GetLinearPos ()
	Returns value of the linear position.
proto external void	SetAngularLimits (float lowerLimit, float upperLimit)
	Sets angular limits of the joint.
proto external void	SetAngularLimits (float lowerLimit, float upperLimit)
	Sets angular limits of the joint.
proto external void	SetAngularMotor (float velocity, float force)
	Allows motor to move slider at specific angular velocity.
proto external void	SetAngularMotor (float velocity, float force)
	Allows motor to move slider at specific angular velocity.
proto external void	SetDirAngular (float softness, float restitution, float damping)
	Sets parameters relevant for moving inside angular limits.
proto external void	SetDirAngular (float softness, float restitution, float damping)
	Sets parameters relevant for moving inside angular limits.
proto external void	SetDirLinear (float softness, float restitution, float damping)
	Sets parameters relevant for moving inside linear limits.
proto external void	SetDirLinear (float softness, float restitution, float damping)
	Sets parameters relevant for moving inside linear limits.
proto external void	SetLimAngular (float softness, float restitution, float damping)
	Sets parameters relevant for hitting angular limit.
proto external void	SetLimAngular (float softness, float restitution, float damping)
	Sets parameters relevant for hitting angular limit.
proto external void	SetLimLinear (float softness, float restitution, float damping)
	Sets parameters relevant for hitting linear limit.
proto external void	SetLimLinear (float softness, float restitution, float damping)
	Sets parameters relevant for hitting linear limit.
proto external void	SetLinearLimits (float lowerLimit, float upperLimit)
	Sets linear limits of the joint.
proto external void	SetLinearLimits (float lowerLimit, float upperLimit)
	Sets linear limits of the joint.
proto external void	SetLinearMotor (float velocity, float force)
	Allows motor to move slider at specific linear velocity.
proto external void	SetLinearMotor (float velocity, float force)
	Allows motor to move slider at specific linear velocity.
proto external void	SetOrthoAngular (float softness, float restitution, float damping)
	Sets parameters relevant for case (against constraint axis).
proto external void	SetOrthoAngular (float softness, float restitution, float damping)
	Sets parameters relevant for case (against constraint axis).
proto external void	SetOrthoLinear (float softness, float restitution, float damping)
	Sets parameters relevant for case (against constraint axis).
proto external void	SetOrthoLinear (float softness, float restitution, float damping)
	Sets parameters relevant for case (against constraint axis).

Detailed Description

Definition at line 10 of file physicssliderjoint.c.

Member Function Documentation

◆ GetAngularPos() [1/2]

proto external float GetAngularPos ( )

private

Returns value of the angular position.

◆ GetAngularPos() [2/2]

proto external float GetAngularPos ( )

private

Returns value of the angular position.

◆ GetLinearPos() [1/2]

proto external float GetLinearPos ( )

private

Returns value of the linear position.

◆ GetLinearPos() [2/2]

proto external float GetLinearPos ( )

private

Returns value of the linear position.

◆ SetAngularLimits() [1/2]

proto external void SetAngularLimits	(	float	lowerLimit,
		float	upperLimit )

private

Sets angular limits of the joint.

Parameters

lowerLimit	Value of the lower angular limit
upperLimit	Value of the upper angular limit

◆ SetAngularLimits() [2/2]

proto external void SetAngularLimits	(	float	lowerLimit,
		float	upperLimit )

private

Sets angular limits of the joint.

Parameters

lowerLimit	Value of the lower angular limit
upperLimit	Value of the upper angular limit

◆ SetAngularMotor() [1/2]

proto external void SetAngularMotor	(	float	velocity,
		float	force )

private

Allows motor to move slider at specific angular velocity.

Parameters

velocity	Target angular velocity motor tries to maintain
force	Maximum angular force motor can overcome. 0 to turn motor off.

◆ SetAngularMotor() [2/2]

proto external void SetAngularMotor	(	float	velocity,
		float	force )

private

Allows motor to move slider at specific angular velocity.

Parameters

velocity	Target angular velocity motor tries to maintain
force	Maximum angular force motor can overcome. 0 to turn motor off.

◆ SetDirAngular() [1/2]

proto external void SetDirAngular	(	float	softness,
		float	restitution,
		float	damping )

private

Sets parameters relevant for moving inside angular limits.

Parameters

softness
restitution
damping

◆ SetDirAngular() [2/2]

proto external void SetDirAngular	(	float	softness,
		float	restitution,
		float	damping )

private

Sets parameters relevant for moving inside angular limits.

Parameters

softness
restitution
damping

◆ SetDirLinear() [1/2]

proto external void SetDirLinear	(	float	softness,
		float	restitution,
		float	damping )

private

Sets parameters relevant for moving inside linear limits.

Parameters

softness
restitution
damping

◆ SetDirLinear() [2/2]

proto external void SetDirLinear	(	float	softness,
		float	restitution,
		float	damping )

private

Sets parameters relevant for moving inside linear limits.

Parameters

softness
restitution
damping

◆ SetLimAngular() [1/2]

proto external void SetLimAngular	(	float	softness,
		float	restitution,
		float	damping )

private

Sets parameters relevant for hitting angular limit.

Parameters

softness
restitution
damping

◆ SetLimAngular() [2/2]

proto external void SetLimAngular	(	float	softness,
		float	restitution,
		float	damping )

private

Sets parameters relevant for hitting angular limit.

Parameters

softness
restitution
damping

◆ SetLimLinear() [1/2]

proto external void SetLimLinear	(	float	softness,
		float	restitution,
		float	damping )

private

Sets parameters relevant for hitting linear limit.

Parameters

softness
restitution
damping

◆ SetLimLinear() [2/2]

proto external void SetLimLinear	(	float	softness,
		float	restitution,
		float	damping )

private

Sets parameters relevant for hitting linear limit.

Parameters

softness
restitution
damping

◆ SetLinearLimits() [1/2]

proto external void SetLinearLimits	(	float	lowerLimit,
		float	upperLimit )

private

Sets linear limits of the joint.

Parameters

lowerLimit	Value of the lower linear limit
upperLimit	value of the upper linear limit

◆ SetLinearLimits() [2/2]

proto external void SetLinearLimits	(	float	lowerLimit,
		float	upperLimit )

private

Sets linear limits of the joint.

Parameters

lowerLimit	Value of the lower linear limit
upperLimit	value of the upper linear limit

◆ SetLinearMotor() [1/2]

proto external void SetLinearMotor	(	float	velocity,
		float	force )

private

Allows motor to move slider at specific linear velocity.

Parameters

velocity	Target linear velocity motor tries to maintain
force	Maximum linear force motor can overcome. 0 to turn motor off.

◆ SetLinearMotor() [2/2]

proto external void SetLinearMotor	(	float	velocity,
		float	force )

private

Allows motor to move slider at specific linear velocity.

Parameters

velocity	Target linear velocity motor tries to maintain
force	Maximum linear force motor can overcome. 0 to turn motor off.

◆ SetOrthoAngular() [1/2]

proto external void SetOrthoAngular	(	float	softness,
		float	restitution,
		float	damping )

private

Sets parameters relevant for case (against constraint axis).

Parameters

softness
restitution
damping

◆ SetOrthoAngular() [2/2]

proto external void SetOrthoAngular	(	float	softness,
		float	restitution,
		float	damping )

private

Sets parameters relevant for case (against constraint axis).

Parameters

softness
restitution
damping

◆ SetOrthoLinear() [1/2]

proto external void SetOrthoLinear	(	float	softness,
		float	restitution,
		float	damping )

private

Sets parameters relevant for case (against constraint axis).

Parameters

softness
restitution
damping

◆ SetOrthoLinear() [2/2]

proto external void SetOrthoLinear	(	float	softness,
		float	restitution,
		float	damping )

private

Sets parameters relevant for case (against constraint axis).

Parameters

softness
restitution
damping

The documentation for this class was generated from the following file:

F:/Games/Dayz/scripts/1_core/physics/physicssliderjoint.c

Private Member Functions

Detailed Description

Member Function Documentation

◆ GetAngularPos() [1/2]

◆ GetAngularPos() [2/2]

◆ GetLinearPos() [1/2]

◆ GetLinearPos() [2/2]

◆ SetAngularLimits() [1/2]

◆ SetAngularLimits() [2/2]

◆ SetAngularMotor() [1/2]

◆ SetAngularMotor() [2/2]

◆ SetDirAngular() [1/2]

◆ SetDirAngular() [2/2]

◆ SetDirLinear() [1/2]

◆ SetDirLinear() [2/2]

◆ SetLimAngular() [1/2]

◆ SetLimAngular() [2/2]

◆ SetLimLinear() [1/2]

◆ SetLimLinear() [2/2]

◆ SetLinearLimits() [1/2]

◆ SetLinearLimits() [2/2]

◆ SetLinearMotor() [1/2]

◆ SetLinearMotor() [2/2]

◆ SetOrthoAngular() [1/2]

◆ SetOrthoAngular() [2/2]

◆ SetOrthoLinear() [1/2]

◆ SetOrthoLinear() [2/2]